Residential · Clermont, FL
A concrete pool deck should be comfortable underfoot, drain correctly, and resist cracking and spalling. Clermont Concreters builds and replaces pool decks with proper base prep, control joints, and slip-resistant finishes that fit your coping and screen enclosure.
Prep starts with demolition or sawcut removal as needed, then we fine-grade for consistent slope away from the pool and home. We compact the subgrade, install a 4-6 inch tamped road base where required, and use a vapor barrier or geotextile when conditions call for it. Forms are set tight to existing coping, skimmers, and drains, then we place reinforcement such as #3 rebar on chairs or 6x6 W2.9 welded wire mesh so it stays in the slab, not on the ground.
In Central Florida, heat, heavy rain, and sandy soils can stress a slab, so we plan for drainage, expansion, and a finish that stays safer when wet. We typically pour 4 inches of 3,500-4,000 psi concrete with fiber reinforcement available, then cut control joints to manage shrinkage cracking and isolate the deck from the pool shell with an expansion joint. Finish options include broom-finish for traction, light salt-finish texture, or stamped concrete with a slip-additive sealer, plus integral color or stain for a cleaner look. We can also add a thickened edge, channel drains, and proper tie-ins to existing patios and walkways.
Clermont customers choose us because we do the unglamorous parts right, layout, slope, base compaction, reinforcement placement, and clean joint lines. You get clear communication on access, protection of tile and coping, and how we will manage washout and curing around a live pool area. We show up with the right equipment for a clean placement, including skid-steer for material handling, a compactor for base, and proper screeds and bull floats for flatness without overworking the surface. Every job gets a written scope, realistic schedule, and work performed by a licensed and insured concrete contractor.
Before we pour, we walk the site with you to confirm elevations, drainage direction, steps, equipment pads, and the exact finish and color selections. After placement we cure properly, cut joints at the right time, and keep edges and transitions clean at coping, screen posts, and door thresholds. You receive care instructions, expected cure times, and a straightforward plan for sealing, if selected, plus guidance on when it is safe to return patio furniture and reopen the pool area. The result is a durable concrete pool deck with predictable drainage, crisp joints, and traction you can trust.
Yes. We provide a free written estimate after an on-site measure so thickness, reinforcement, joints, and drainage are clearly defined.
Yes. Clermont Concreters is licensed and insured, and we can provide proof of insurance for commercial and property management projects.
Yes. We handle concrete demolition, sawcutting as needed, haul-off, and subgrade rebuild before the new pour.
When permits are required, we help identify the local requirements and coordinate paperwork and inspections as needed for the project scope.
Yes. We plan joint lines and elevations to create clean transitions, and we can dowel or key connections when appropriate for the application.
A well-built concrete pool deck is more than a border around the water, it is your main walking surface, a drainage system, and a safety feature. Clermont Concreters installs new pool decks and replaces failing slabs with attention to slope, jointing, reinforcement, and finishes that hold up to sun, rain, and pool chemicals. Whether you want a simple broom-finish deck or a decorative stamped pattern, we build it on a stable base so it stays flatter, drains better, and looks consistent.
Most pool deck problems start below the surface. Settling subgrade, soft spots, and poorly compacted base lead to rocking slabs, cracked corners, and low areas that hold water. We start by evaluating access, existing coping height, and where water currently pools, then we fine-grade to create consistent fall to the yard or a drain. When replacement is needed, we remove concrete cleanly, recompact, and rebuild the base, then form for consistent thickness, commonly 4 inches, with thickened areas where loads or edges require it.
Concrete performance depends on the mix and the details. We commonly specify 3,500-4,000 psi concrete, add fiber when appropriate, and place reinforcement such as #3 rebar or 6x6 welded wire mesh correctly. Control joints are planned and cut to guide shrinkage cracks, and we isolate the deck from the pool shell with expansion material to accommodate movement. Finish choices include broom-finish for traction, salt-finish for subtle texture, and stamped concrete with a sealer that includes a slip additive for wet conditions.
If you are comparing quotes for a concrete pool deck, ask how the contractor will handle base compaction, reinforcement support, joint layout, drainage, and curing. Those are the items that determine long-term durability more than decorative upgrades. Clermont Concreters provides a free written estimate, a defined schedule, and a final walkthrough so you know exactly what was built, how to care for it, and when it is ready for use.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Clermont. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
